Netopia 4000-Series manual IP Parameters Default Profile

3-24 Firmware User Guide

■Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.

IP Parameters (Default Profile)

+--NAT Map List Name---	+
+----------------------	+
Easy-PAT List
my_map
Address Trans <<None>>	s
NAT Map List.
NAT Server Li
Filter Set (F
Remove Filter
Receive RIP:	th
+----------------------	+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

■Select the map list you want to bind to the default profile and press Return. The map list you selected will now be bound to the default profile.

■Select NAT Server List and press Return. A pop-up menu displays a list of your defined server lists.

IP Parameters (Default Profile)

+-NAT Server List Name-+

+----------------------	+
Easy-Servers
my_servers
Address Trans <<None>>	s
NAT Map List.	_first_map
NAT Server Li
Filter Set (F
Remove Filter
Receive RIP:	th
+----------------------	+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

■Select the server list you want to bind to the default profile and press Return. The server list you selected will now be bound to the default profile.

Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask fields’ visibility are dependent only on the IP Addressing type.