Netopia 4000-Series manual Telnet Access

Security 10-17

To add a new user account, select Add User in the Security Options screen and press Return. The Add Name With Write Access screen appears.

Add Name With Write Access

Enter Name:

Enter Password (11 characters max):

ADD NAME/PASSWORD NOW CANCEL

Follow these steps to configure the new account:

1.Select Enter Name and enter a descriptive name (for example, the user’s first name).

2.Select Enter Password and enter a password.

3.To accept the new name/password combination, select ADD NAME/PASSWORD NOW and press Return. To exit the Add Name With Write Access screen without saving the new account, select CANCEL. You are returned to the Security Options screen.

To delete a user account, select Delete User to display a list of accounts. Select an account from the list and press Return to delete it. To exit the list without deleting the selected account, press Escape.

Telnet Access

Telnet is a TCP/IP service that allows remote terminals to access hosts on an IP network. The Netopia Firmware Version 5.4 supports Telnet access to its configuration screens.

Caution!

You should consider password-protecting or restricting Telnet access to the Router if you suspect there is a chance of tampering.

To password-protect the configuration screens, select Easy Setup from the Main Menu, and go to the Easy Setup Security Configuration screen. By entering a name and password pair in this screen, all access via serial, Telnet, SNMP, and Web server will be password-protected.