Netopia 4000-Series manual Configuring the Voice Features, Voice Configuration screen appears

8-2 Firmware User Guide

central office, but not long distance or local calls.

Toll Restriction Operation - PBX/Local Switching Mode: When you pick up the phone, you receive local PBX dial tone. When a 9 (or outside line code) is pressed, the IAD detects the digit and returns busy (locally generated). Incoming calls are allowed. Extension calls (locally switched) are allowed.

■Speed Dial - Centrex Mode: In Centrex Mode, when you pick up the phone, dial-tone from the central office is present. It is therefore, not possible to program the phone or use speed dial in this mode from the phone.

Speed Dial - PBX/Local Switching mode: In this mode, you have the ability to pick up the phone, receive local dial tone and proceed to program the phone w/ local speed dial options. In addition, taking the phone off hook and pressing speed dial numbers will cause the stored speed dial digits to be sent out. This is independent of the previous mode.

Configuring the Voice Features

This section describes how to configure the voice telephone features in Netopia Firmware Version 5.4.

From the Main Menu select Voice Configuration.

Netopia IAD

Easy Setup...

WAN Configuration...

System Configuration...

Voice Configuration...

Utilities & Diagnostics...

Statistics & Logs...

Quick Menus...

Quick View...

Return/Enter goes to Easy Setup -- minimal configuration.

You always start from this main screen.

The Voice Configuration screen appears.