Netopia 4000-Series manual Quality of Service QoS settings

2-18 Firmware User Guide

Quality of Service (QoS) settings

■Select the QoS (Quality of Service) setting from the pop-up menu: UBR. or CBR.

UBR: No configuration is needed for UBR VCs. Leave the default value 0 (maximum line rate).

CBR: One parameter is required for CBR VCs. Enter the Peak Cell Rate that applies to the VC. This value should be between 1 and the line rate. You set this value according to specifications defined by your service provider.

Add Circuit
Circuit Name:	Circuit 2
Circuit Enabled:	Yes
Circuit VPI (0-255):	0
Circuit VCI (32-65535):	32
QoS...	CBR
Peak Cell Rate (0 = line rate):	0
Use Connection Profile...	Default Profile
Use Default Profile for Circuit
ADD Circuit NOW	CANCEL

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.

■The Peak Cell Rate field is editable. Netopia Firmware Version 5.4 supports two ATM classes of ser- vice for data connections: Unspecified Bit Rate (UBR) and Constant Bit Rate (CBR). You can configure these classes of service on a per VC basis. The default ATM class of service is UBR.

■Then, select a Connection Profile for the Circuit. To use the Default Profile, select Use Default Profile for Circuit and press Return. For other options, select a profile from the Use Connection Profile pop-up menu.