Netopia 4000-Series manual Navigating through the Console Screens

Introduction 1-7

Navigating through the Console Screens

Use your keyboard to navigate the Netopia Firmware Version 5.4’s configuration screens, enter and edit information, and make choices. The following table lists the keys to use to navigate through the console screens.

To...	Use These Keys...
Move through selectable items in a screen or pop-up menu	Up, Down, Left, and Right Arrow
Set a change to a selected item or open a pop-up menu of	Return or Enter
options for a selected item like entering an upgrade key
Change a toggle value (Yes/No, On/Off)	Tab
Restore an entry or toggle value to its previous value	Esc
Move one item up	Up arrow or Control + K
Move one item down	Down arrow or Control + O
Display a dump of the device event log	Control + E
Display a dump of the WAN event log	Control + F
Refresh the screen	Control + L

To help you find your way to particular screens, some sections in this guide begin with a graphical path guide similar to the following example:

Main

Menu

System

Configuration

IP Setup

This particular path guide shows how to get to the Network Protocols Setup screens. The path guide represents these steps:

1.Beginning in the Main Menu, select System Configuration and press Return. The System Configuration screen appears.

2.Select IP Setup and press Return. The IP Setup screen appears.

To go back in this sequence of screens, use the Escape key.