Netopia 4000-Series IP Parameters WAN Default Profile, Toggle Address Translation Enabled to Yes

Multiple Network Address Translation 3-23

IP Parameters (WAN Default Profile)

The Netopia Firmware Version 5.4 using RFC 1483 supports a WAN default profile that permits several parameters to be configured without an explicitly configured Connection Profile.

The procedure is similar to the procedure to bind map lists and server lists to a Connection Profile.

From the Main Menu go to the WAN Configuration screen, then the Default Profile screen. Select IP Parameters and press Return.

Main	WAN
Menu	Configuration

The IP Parameters (Default Profile) screen appears.

WAN Default

Profile

IP Parameters

IP Parameters (Default Profile)

Address Translation Enabled:	Yes
NAT Map List...	Easy-PAT List
NAT Server List...	Easy-Servers
Filter Set (Firewall)...
Remove Filter Set
Receive RIP:	Both

Return/Enter to select <among/between> ...

■Toggle Address Translation Enabled to Yes.