Netopia 4000-Series manual Configuring a Dial-Up Networking profile

4-16 Firmware User Guide

Configuring a Dial-Up Networking profile

Once you have created your Dial-Up Networking profile, you configure it for TCP/IP networking to allow you to connect to the Internet through your Internet connection device. Do the following:

1.Double-click the My Computer (or whatever you have named it) icon on your desktop.

Open the Dial-Up Networking folder. You will see the icon for the profile you created in the previous section.

2.Right-click the icon and from the pop-up menu select Properties.

3.In the Properties window click the Server Type button.

From the Type of Dial-up Server pull-down menu select the appropriate type of server for your system version:

■Windows 95 users select PPP: Windows 95, Windows NT 3.5, Internet

■Windows 98 users select PPP: Windows 98, Windows NT Server, Internet

In the Allowed network protocols area check TCP/IP and uncheck all of the other checkboxes.

Note: Netopia’s PPTP implementation does not currently support tunnelling of IPX and NetBEUI protocols.