Netopia 4000-Series manual Serial Port Configuration Serial Port Mode

7-4 Firmware User Guide

Serial Port Configuration
	+--------------	+
	+--------------	+
Serial Port Mode...	Console Only
	Modem/Auto
	+--------------	+

■The default mode is Console Only. This is the normal state for using a terminal emulation application to manage the router. See “Connecting a Console Cable to your Equipment” on page 1-5.

If you select Modem/Auto from the pull-down menu, the router becomes capable of auto detecting the presence of a modem or a console connection attached to the serial console port.

■A console connection is detected at the connection speed defined on the Console Configuration menu (see “Console Configuration” on page 2-43).

■A modem will be detected at the data rate you specify in the following menu. It will not auto detect the Console baud rate in Modem/Auto mode.

Serial Port Configuration

Serial Port Mode...	Modem/Auto
Data Rate (kbps)...	57600
Serial Modem Init String:	AT&F&C1&D2E0S0=1
Serial Modem Directory Number: