Xerox CX240, CX250 manual Restoring the Factory Default Configuration

224 Appendix B– Restoring the Spire CX250 Color Server Software

Restoring the Factory Default Configuration

To restore the Factory Default configuration, the operating system must be in Factory Default mode. See Verifying the Current Recovery Type on

page 221.

Note: The Spire CX250 color server backup configuration default is the Last

Image configuration.

1.Turn on the Spire CX250 color server.

Note: If the Spire CX250 color server is on and the Spire Application workspace is open, quit the Spire Application software and wait for the Spire icon to disappear from the desktop taskbar.

Before After

2.If required, return the ghost file or files that you moved to an external device to partition E.

3.Using the tip of a pen or similar object, press the RCVR (OS recovery) button on the Spire CX250 color server.

Important: If you only want to verify the current recovery type, but do not want to initiate the recovery process, press the RCVR (OS recovery) button again to exit the recovery mode (LED 7 turns off).

Note: You can change the configuration only when the operating system recovery mode is initiated (LED 7 illuminates steady orange).

4.From your client PC, Mac client, or portable workstation, connect to the Spire CX250 color server via the RDC utility.

Note: This step is required only on the CX250 basic configuration.