Xerox CX250, CX240 manual Defining the Calibration Device, Scanner Calibration

Defining the Calibration Device 109

Defining the Calibration Device

If you have the basic or Control Station configuration, you can only calibrate using the scanner calibration method.

If you have the Pro configuration, the default calibration mode is scanner calibration. If you want to calibrate using the X-Rite DTP34 QuickCal densitometer, set the calibration method to external device.

¾In the Settings window, set the Calibration Device option to use

external calibration device.

Note: This option is available only if you have the Pro configuration. For more information, see Calibration Device on page 155.

Scanner Calibration

This section describes the scanner calibration process.

Note:

It is recommended that:

1.After you perform the first calibration, you print the IQ Test.pdf file from the D:\Shared\Sample Files folder. Each time you calibrate, use this file as a visual reference to verify that the printer has returned to its start point.

2.You calibrate both the printer and scanner at the same time. If you only place the print chart on the platen, the printer is calibrated. If you only place the scanner chart on the platen, the scanner is calibrated.

1.In the Spire CX250 color server application, from the Tools menu, select Calibration.

2.In the Calibration window, click Calibrate.