Xerox CX250, CX240 manual Calibration List, Following options are available

Using Calibration Tables 123

The following options are available:

•Click Calibrate to run the Color Calibration Wizard. This wizard guides you in the use of the X-Rite DTP34 QuickCal densitometer to create calibration tables, see Creating a Calibration Table on page 116.

•Select a calibration table from the Calibration List and click Delete to delete the calibration table.

•Click Close to close the Calibration window.

Calibration List

The Spire CX250 color server uses calibration tables to compensate for the difference between the printer’s performance and the required values.

The following calibration look up tables are provided:

•SpireNormal: Applies the factory default calibration table. Since this is a default lookup table, it cannot be overwritten.

•SpireSaturated: Applies the factory default saturated calibration table. This look up table applies a darker calibration table in comparison to the SpireNormal look up table. Since this look up table is a default table it cannot be overwritten.

•Normal: Initially the Normal look up table is identical to the SpireNormal look up table. This resemblance changes as soon as you calibrate your Spire CX250 color server, and at the end of the calibration process choose to save your calibration table as default. As a result, your calibration table is saved as the Normal look up table.

•Saturated: Initially the Saturated look up table is identical to the SpireSaturated look up table. This resemblance changes as soon as you calibrate your Spire CX250 color server, and at the end of the calibration process choose to save your calibration table as default. As a result, your calibration table is saved as the Saturated look up table.

•Select None if you do not want to apply a calibration table to the job.