Xerox CX240, CX250 manual Margins, Marks and Bleed

196 Appendix A– Setting Parameters

4.Type a new name for the user-defined imposition template.

5.Click OK.

The renamed user-defined imposition template appears in the imposition template list.

To delete a user-defined imposition template:

1.On the toolbar, click the Resource Center button .

2.In the Resource list, select Imposition Templates.

3.Select a user-defined imposition template from the list, and click

Remove .

Margins

¾Enter the desired margins sizes to adjust the spaces between the outside edges of pages and the edges of the sheet on which they are printed.

Margin settings need to suit finishing equipment and requirements.

Confirm binding parameters with your binder when planning your sheet.

Marks and Bleed

The Marks & bleed parameter enables you to mark where trimming and folding should occur.

When you set bleed options, you extend part or all of the printed image beyond the trimming boundary. The bleed options ensure that an inaccurate trim setting will not leave an undesired white space at the edge of the page. The bleed options produce sharp page boundaries with color that extends all the way to the edge of the page.

To select marks and bleed options: