Xerox CX240, CX250 manual Color Workflow

118 Chapter 7– Color Workflow

6.In the Image Quality list, select the desired image quality. The default setting is Use Printer Settings.

7.In the Gloss Enhanced list, select Yes to create a glossy finish on the chart.

8.Set the number of copies you need by typing the number or using the arrows next to the box to select the number.

Note: Since the performance of the Xerox DocuColor 240/250 printer- copier is best after several pages have been printed, it is recommended that you print at least 10 copies of the first calibration chart and use one of the last copies printed.

9.Click Print.

The Start Point Density calibration is printed.

Note: If you selected Automatic as the Screening Method in Step 1 of the wizard, the Xerox DocuColor 240/250 printer-copier prints two charts, an Image Density Calibration Chart and a Text/Line Art Chart.

10.Collect the chart(s) from the printer.

Step 2 of the Color Calibration Wizard appears. In this step you scan the start point chart so that the wizard can measure each separation and find the point at which the toner appears on the paper.