Xerox CX240, CX250 manual Apr

200 Appendix A– Setting Parameters

APR

Note: This parameter is available only if you have the Pro configuration.

1.In the APR options area, select one of the following options:

•Print with high res: replaces low-resolution images in your job with high-resolution images that are located in a specified APR path.

•Print with low res: prints the job with the existing low-resolution images—for example, for proofing purposes.

2.In the Use APR mask from area, select one of the following options:

•PostScript image: uses the masking data contained in the low- resolution image file.

•High res: uses the masking data contained in the high-resolution image file.

•Both: uses the masking data that is common to both high- resolution and low-resolution image files. For example, if the images defined by the two sets of masking data overlap, the overlapping area is RIPed.

Note: If the masking data in the low-resolution image file defines a completely different part of an image than the masking data in the high-resolution file, no masking data is used.