Xerox CX240, CX250 manual Sizes

192 Appendix A– Setting Parameters

ˆStep & Repeat: prints multiple copies of the same image on one sheet so that the sheet is used to maximum capacity. This method is used mainly for printing business cards.

Notes:

•When you use the Step & Repeat template for VI jobs, the system prints the job in Z-Sorting mode. This enables imposed VI jobs to be sorted for cut-and-stack finishing.

•It is possible to use specific step-and-repeat templates to print several different images on one sheet.

•This option is available only if you have the Pro configuration.

If you select Step & Repeat, the following option is available:

•Cut & Stack: enables Step & Repeat jobs to be printed, cut, stacked, and bound in the most efficient manner while preserving the original sorting. A job’s pages, booklets, or books are sorted in a Z-shape. In other words, each stack of pages is sorted in consecutive order. When stacks are piled one on top of another, the entire job is already sorted up or down.

Note: If you select Cut & Stack, you cannot make changes or enter a valid exception on the Exceptions tab.

ˆSaddle Stitch: prints pages ready for applying a book-finishing technique in which the pages of a book are attached through stitching or stapling in the spine fold—for example, brochures.

ˆPerfect Bound: prints pages ready for applying a book-finishing technique in which the pages of a book are attached by trimming the spine fold, roughening the edges of the gathered pages, and gluing them together—for example, hardcover books.

Sizes

1.In the Paper size list, select the desired paper stock size. If you select Custom, type the height in the H box and width in the W box, and then select LEF or SEF.

2.In the Media type list, select the desired paper stock type. The default setting is Use Printer Settings. When this option is selected, your job is printed on the media type that is defined on the Xerox DocuColor 240/250 printer-copier.