Xerox CX240, CX250 manual Printing the Job with the Calibration Table

124 Chapter 7– Color Workflow

Printing the Job with the Calibration Table

Now that you have calibrated the paper you are going to use for printing, you can select the calibration table to print any job on the same paper stock using the same screen type. You can print the reference job you printed before with the new calibration table to evaluate the calibration results.

To print the reference job:

1.In the Spire CX250 color server workspace, suspend the Process

Queue.

2.Import the job.

3.Double-click the job to open the Job Parameters window.

For more information about tabs in the Job Parameters window, see Setting

Parameters in the Job Parameters Window on page 176.

4.On the Paper Stock tab, select the desired paper stock.

5.On the Color tab, select the calibration you created for the particular stock from which you printed.

6.On the Color tab, select the screening method you used for the selected calibration.

7.Set all other desired parameters, and then click OK to close the Job Parameters window.

8.Activate the Process Queue and Print Queue, and inspect the printed job.

If you see that the print out has any color imperfection, review the job parameter settings and make changes if necessary. If there are still color imperfections, perform machine maintenance and repeat the calibration process.