Xerox CX250, CX240 manual Job Flow, Preflight

Setting Parameters in the Job Parameters Window 201

Job Flow

The Job Flow parameter enables you to specify a job flow for a job that is imported to the Spire CX250 color server from the network or from the Spire CX250 color server folders.

¾Select one of the job flow options:

ˆ Process & Print: to set the Spire CX250 color server to RIP the PDL

files, print them, and store them in the Storage window (unless the Job Deletion parameter is set to Delete after Complete)

ˆProcess & Store: to RIP the PDL files and move them to the Storage window as RTP jobs

ˆSpool & Store: places the PDL files directly into the Storage window without processing them.

Note: This option can be defined only through the PPD parameters of the virtual printer.

Preflight

¾Select Run Preflight check to check the status of key job components before the job is sent for printing.

Your job is RIPed and the missing components are identified. You can set the preflight to detect the following problems:

ˆHigh-resolution images

ˆIncorrect links to the high-resolution images folder

ˆMissing fonts

ˆSpot colors that are not defined in the Spire CX250 color server spot color dictionary

Note: If a job component is missing, the job fails before it is RIPed and an alert message appears. The job is transferred to the Storage window. Information about missing components will appear in the Job History window.

The results of the preflight check are displayed in a Preflight Report. To generate this report, right-click the RTP job in the Storage window and select Preflight Report. For more information on the Preflight Report, see Preflight Report on page 103.