Xerox CX250, CX240 manual Tray list, select the required input tray

Calibrating with the X-Rite DTP34 QuickCal Densitometer 117

Tip: Click the Densitometer Tutorial - Click & Learn icon to display an animation of the measurement process and to learn how to use the X-Rite DTP34 QuickCal densitometer correctly.

The first step in the wizard is Print Calibration Chart. This step enables you to detect the point where you start to see toner on the paper.

3.In the Tray list, select the required input tray.

The default tray setting is Auto. When this option is selected, the wizard looks for a tray that contains Letter LEF or A4 LEF paper. If the wizard does not find a tray with either of these sizes, an alert appears.

You can print calibration charts on any size paper. Ensure that the required paper is in one of the trays, and then select that tray in the wizard.

4.In the Screening Method list, select the desired screening method.

Note: Make sure you set the screening method to the one you are going to use to print the job.

5.In the Media Type list, select the desired paper stock type. The default setting is Use Printer Settings, which means that your job is printed on the media type that is defined on the Xerox DocuColor 240/250 printer-copier.