Xerox CX240, CX250 manual Tray, Media Type list, select the desired media

180 Appendix A– Setting Parameters

Tray

¾In the Tray list, select the desired tray, and load the specific stock in this tray. If you select Auto, any tray with the specific paper stock is used.

Note: Make sure that the paper in the selected tray complies with all the other paper stock parameters. If the paper in the tray does not match all the paper stock parameters, the job is frozen.

Media Type

1.In the Media Type list, select the desired media.

Tip: If you selected Transparency, select the Add interleave check box to insert a blank page between each transparency. To customize the interleave, select a different paper size, media type, or tray from the appropriate lists.

2.In the Image Quality list, select the attributes of the media. The options vary according to the media that you selected in the Media Type list.

3.To create a glossy finish on the job pages, select Gloss Enhanced.

4.To print the second side of each page in a manual duplex workflow, select Side-2 printing.

Note: Side-2 printing is not supported for all media types.