Xerox CX240, CX250 manual Color Calibration Wizard appears

120 Chapter 7– Color Workflow

11.While pressing down the button on the X-Rite DTP34 QuickCal densitometer, align the head with the cyan arrow’s tip. The arrow is to the left of the cyan column on the Image Density Calibration Curve. Its tip intersects the semi-dotted line.

12.Sweep the X-Rite DTP34 QuickCal densitometer over the cyan column.

A beep sounds and a green light blinks when the scan is complete. A check mark appears over the cyan icon and instructions appear for the next sweep, this time for the magenta column.

13.After each color sweep, wait for the check mark to appear over the appropriate icon and follow the instructions as listed.

Note: Ensure that the separation columns on the chart are scanned in the

order they appear in the icons: Cyan>Magenta>Yellow>Black.

When all of the separation columns have been successfully scanned, a check mark appears next to all icons.

Notes:

•If at any stage the scanning has not been completed properly, click Reset and scan again.

•If an error occurs while you are scanning the chart, an alert message appears. Click OK and re-scan the charts.

•If you selected Automatic as the Screening Method in Step 1 of the wizard, repeat steps 11-13for the Text/Line Art chart.

Step 3 of the Color Calibration Wizard appears.