Xerox CX240, CX250 manual Appendix A- Setting Parameters

190 Appendix A– Setting Parameters

¾In the Gradation list, select one of the defined gradation tables.

Note: The default setting is None. No gradation table is applied to your job.

Brightness

Use this option to make last-minute adjustments to the print job after proofing.

¾To select a brightness level for a job, move the Brightness slider to the required brightness level (the range starts from Light, which applies -15%, to Dark, which applies +15%).

Contrast

Adjust the Contrast option to control the difference between light and dark tones in your image.

¾To select a contrast level for the print job, move the Contrast slider to the required contrast level (the range starts from Less, which applies -10%, to More, which applies +10%).