Xerox CX250, CX240 manual Backing Up and Restoring the Software 217

Backing Up and Restoring the Software 217

b.If there is not adequate disk space to perform the backup, the following message appears:

Click OK to continue, free disk space on Partition C, and then continue the backup procedure from step 3.

5.The Spire CX250 color server restarts and the Norton Ghost window appears.

The files from partition C are copied to the Last Image file on partition E. The process takes about 10 minutes to complete.

The Spire CX250 color server restarts and the Windows XP desktop appears.

Note: On the CX250 Control Station and Pro configurations, the appearance of the Windows XP desktop indicates that a successful backup has been performed.

On the CX250 basic configuration, when the Spire CX250 color server restarts, your current RDC session terminates. To determine that a successful backup was completed, do one of the following:

•Wait ten minutes and reconnect to the Spire CX250 color server via the RDC utility. If you are able to connect to the server, the backup succeeded.

•On the CX250 basic configuration, check LEDs 3 and 5. If both LEDs illuminate steady green, the backup succeeded.

You have completed Backing Up the CX250 Last Image Configuration.

Tip: To copy the files to an external device, select Start > Run, type E: and click OK. Copy only the files located on E:LI.GHO and E:LIxxx.GHO (Last Image configurations) or E:FD.GHO and E:FDxxx.GHS (Factory Default configurations).