Netopia 4000-Series manual Exposed Addresses

2-40 Firmware User Guide

Stateful Inspection Parameters

+Exposed Address List N+
+----------------------+
Max. TCP Sequ my_xposed_list	0
<<None>>
Enable defaul	No
Deny Fragment	No
Exposed Addre
+----------------------+

Up/Down Arrows to select, then Return/Enter; ESC to cancel.

Exposed Addresses

You can specify the IP addresses you want to expose by selecting Add Exposed Address List and pressing Return. The Add Exposed Address List screen appears.

Add Exposed Address List

Exposed Address List Name: my_xposed_addr_list

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.

Add, Edit, or delete exposed addresses options are active only if NAT is disabled on an WAN interface. The hosts specified in exposed addresses will be allowed to receive inbound traffic even if there is no corresponding outbound traffic.