Netopia 4000-Series manual Monitoring multiple virtual circuits, ATM Sdsl

2-22 Firmware User Guide

■Circuit Enabled allows you to enable or disable the circuit, using the Tab key. The default is enabled.

■Traffic Type allows you to select which type of traffic will be routed on this circuit, Voice or Data. If you choose Voice, the Connection Profile is field becomes unavailable and does not display.

■Circuit VPI allows you to specify the Virtual Path Identifier (VPI) value for the circuit. The default VPI value for both ADSL and cell-based DSL is zero (0).

■Circuit VCI allows you to specify the Virtual Channel Identifier (VCI) value for the circuit. The default VCI value depends on the type of DSLAM to which you are connecting.

■Accessing the Connection Profile Is field in the Change Circuit menu depends not on the number of Connection Profiles you have created, but the number of data VCs you have added. (See “Multiple ATM PVC configuration” on page 2-16.) If you have more than one data VC you can choose how Connection Profiles are associated with VCs, otherwise you get default behavior and the Connection Profile Is field cannot be selected.

Monitoring multiple virtual circuits

The General Statistics screen adds a selection for ATM VC Statistics.

To access the ATM VC Statistics screen navigate from the Main Menu to Statistics & Logs then General Statistics.

Main

Menu

The General Statistics screen appears.

Statistics

& Logs

General

Statistics

		General Statistics
Physical I/F-----	Rx Bytes---	Tx Bytes---	Rx Pkts---	Tx Pkts----	Rx Err----	Tx Err
Ethernet Hub	0	0	0	0	0	0
Aux Async	0	0	0	0	0	0
ATM SDSL 1	22152	5092	403	404	0	0
Network----------	Rx Bytes---	Tx Bytes---	Rx Pkts---	Tx Pkts----	Rx Err----	Tx Err
IP	0	0	0	0	0	0

VC Traffic Statistics...