9-2 Firmware User Guide
General status
|
|
|
|
| Quick View |
| 10/11/2001 07:31:26 AM | |
Default IP Gateway: | 0.0.0.0 | CPU Load: 4% | Unused Memory: 6044 KB | |||||
Primary DNS Server: | 0.0.0.0 |
|
|
|
| |||
Secondary DNS Server: 0.0.0.0 | Domain Name: Netopia.com |
| ||||||
MAC | IP |
|
| |||||
Ethernet Hub: |
|
|
| |||||
ATM SDSL WAN: | 0.0.0.0 |
|
|
| ||||
|
|
|
| Current DSL Status |
|
|
| |
Profile | ||||||||
ISP |
|
| 1536 | 10 | IP 92.163.4.1 | Lcl | NAT 192.163.100.6 | |
VPN QuickView |
|
| LED Status |
|
|
| ||
|
|
|
|
|
|
| ||
DSL- - - - - - - - - - | - - | |||||||
|
|
|
|
|
|
| | |
G | - |
| - | - |
|
| 'R'= Red 'Y'= Yellow | |
Current Date: The current date; this can be set with the Date and Time utility (see “Date and time” on page
Default IP Gateway: The router’s default gateway, which may be either manually configured or learned via DHCP. This is the value you assigned in the Default IP Gateway field. If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway, it is shown here.
CPU Load: Percentage of the system’s resources being used by all current transmissions.
Unused Memory: The total remaining system memory available for use.
Primary DNS Server: If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your primary default gateway, it is shown here.
Secondary DNS Server: If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as a secondary gateway, it is shown here.
Domain Name: The domain name you have assigned, typically the name of your ISP.
MAC Address: The Router’s hardware address, for those interfaces that support DHCP.
IP Address: The Router’s IP address, entered in the IP Setup screen.
