Netopia 4000-Series manual Add NAT Map List Map List Name

3-10 Firmware User Guide

Select First Public Address and enter the first exterior IP address in the range you want to assign. Select Last Public Address and enter an IP address at the end of the range.

■Select ADD NAT PUBLIC RANGE and press Return. The range will be added to your list and you will be returned to the Network Address Translation screen.

Once the public ranges have been assigned, the next step is to bind interior addresses to them. Because these bindings occur in ordered lists, called map lists, you must first define the list, then add mappings to it.

From the Network Address Translation screen select Add Map List and press Return.

The Add NAT Map List screen appears.

Add NAT Map List

Map List Name: my_map

Add Map...

■Select Map List Name and enter a descriptive name for this map list. A new menu item, Add Map, appears.