Netopia 4000-Series manual Changing a Frame Relay Dlci configuration

WAN and System Configuration 2-13

Changing a Frame Relay DLCI configuration

To modify a Frame Relay DLCI configuration, select Display/Change DLCIs in the Frame Relay DLCI Configuration screen.

Select a DLCI Name from the table and press Return to go to the Change DLCI screen. The parameters in this screen are the same as the parameters in the Add DLCI screen. To find out how to set them, see “Adding a Frame Relay DLCI configuration” on page 2-14.

Change DLCI
DLCI Name:	DLCI 33
DLCI Enabled:	Yes
DLCI Number (16-991):	32
Remote IP Address:	2.0.0.2