Netopia 4000-Series manual Adsl Line Configuration screen is shown below

2-2 Firmware User Guide

ADSL Line Configuration screen

The ADSL Line Configuration screen is shown below:

ADSL Line Configuration

Circuit Type...	Multimode
Trellis Coding Enabled:	On
Signaling Mode...	FDM
Fast Retrain Enabled:	On
Data Link Encapsulation...	RFC1483

1.Select Circuit Type and from the pop-up menu choose the type of circuit to which you will be connecting: Multimode, T1.413, G.dmt/G.lite, or ADI.

2.Select Trellis Coding Enabled. Toggle it to On (the default) or Off.

3.Select Signaling Mode and choose Echo Cancellation or FDM (the default).

4.If you selected Multimode Circuit Type, the Fast Retrain Enabled field appears. Toggle it to On (the default) or Off.

5.Select Data Link Encapsulation and press Return. The pop-up menu will offer you the choice of PPP or RFC1483.

6.Press Escape to return to the WAN Configuration screen.

For multiple permanent virtual circuit (PVC) configurations, see “Multiple ATM Permanent Virtual Circuits” on page 2-16.