2-42 Firmware User Guide
Date and time
You can set the system’s date and time parameters in the Set Date and Time screen.
Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screen appears.
Set Date and | Time |
NTP (Network Time Prot.) Enabled: | On |
Time Server Host Name/IP Address | 204.152.184.72 |
Time Zone... | GMT |
NTP Update Interval (HHHH:MM) | 0:00 |
System Date Format: | MM/DD/YY |
System Time Format: | AM/PM |
Follow these steps to set the system’s date and time:
1.Toggle NTP (Network Time Prot.) Enabled to On to synchronize the Router’s time and date with a network server. Toggle this field to Off to manually set the time and date; the options in this screen will change to allow you to manually enter the time and date parameters.
Note: If time and date are manually set, that information will be lost upon reboot or loss of power.
2.Enter the IP address of the time server in the field Time Server Host Name/IP Address.
3.Select the Router’s time zone from the Time Zone
4.In the NTP Update Interval field, enter how often to synchronize with the time server, using the format HHHH:MM where H is hours and M is minutes.
5.Select a System Date Format; the options are MM/DD/YY, DD/MM/YY, and YY/MM/DD, where M is month, D is day, and Y is year.
6.Select a System Time Format, either AM/PM or 24hrs.
7.Press Escape to return to the System Configuration menu.
Note: NTP can be blocked by some firewall configurations. To ensure that this feature works, create a filterset rule to allow UDP port 123 to be open.
