Netopia 4000-Series manual Firmware User Guide

6-36 Firmware User Guide

IP Profile Parameters
Address Translation Enabled:	Yes
IP Addressing...	Numbered
NAT Map List...	Easy-PAT List
NAT Server List...	Easy-Servers
Local WAN IP Address:	0.0.0.0
Local WAN IP Mask:	0.0.0.0
Remote IP Address:	0.0.0.0
Remote IP Mask:	0.0.0.0
Filter Set...	+----------------+
Remove Filter Set	+----------------	+
	None
	Rx.
Multicast Forwarding...	+----------------	+
RIP Profile Options...

Typically, you will have a Connection Profile that you created in Easy Setup. You may have more. Select the Connection Profile that you want to use from the Display/Change Connection Profile menu, and then select IP Profile Parameters.

By default, Multicast Forwarding is turned off (None) on Connection Profiles until you enable a specific Connection Profile to receive multicast data. You enable it by selecting Rx. from the pull-down menu.