Netopia 4000-Series manual Tcp

WAN and System Configuration 2-41

Change Exposed Address Range ("my_xposed_list")

First Exposed Address:	192.168.1.10
Last Exposed Address:	+-------------	+
	+-------------	+
Protocol...	TCP and UDP
	TCP
Port Start:	UDP
	ANY
Port End:	+-------------	+

CHANGE EXPOSED ADDRESS RANGE CANCEL

■Start Address: Start IP Address of the exposed host range.

■End Address: End IP Address of the exposed host range

■Protocol: Select the Protocol of the traffic to be allowed to the host range from the pull-down menu. Options are Any, TCP, UDP, or TCP/UDP.

■Start Port: Start port of the range to be allowed to the host range. The acceptable range is from 1 - 65535

■End Port: Protocol of the traffic to be allowed to the host range. The acceptable range is from 1 - 65535

You can edit or delete exposed address lists by selecting Show/Change Exposed Address List or Delete Exposed Address List. A list of previously configured exposed addresses appears.

		Add Exposed Address List
+------	Exposed Address Range---------		Protocol-------------------	+
+---------------------------------------------------------------				+
	192.168.1.10	192.168.1.12	TCP and UDP
+---------------------------------------------------------------				+
Up/Down	Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

This allows you to select an exposed address list for editing or deletion.