Psion Teklogix ISO 9001 user manual EAP Credentials, ThirdPartyConfig

Appendix A: Summit Client Utility (SCU)

EAP Credentials

EAP-TLS will work with a RA2041 radio module when Windows Zero Config (WZC) rather than the SCU is used to configure the type. With WZC, the native Windows supplicant instead of the SCU integrated supplicant is used.

A.3.2 EAP Credentials

Keep the following in mind when defining security settings:

•If the credentials specified in the config are incorrect and that config is used, the authentication fails without an error message; you will not be prompted to enter correct credentials.

•If the credentials are not specified in the config, when the radio tries to asso- ciate using that config, you will be prompted to enter the credentials.

•When prompted, you can enter valid credentials, enter invalid credentials, or cancel the operation.

•If you enter valid credentials and tap OK, the radio will associate and authenticate.

•If you enter invalid credentials and tap on OK, the radio will associate but will not authenticate; you will be prompted again to enter creden- tials.

•If you tap on Cancel or clear the credentials fields and tap on OK, the radio will not attempt to associate with that config until you perform one of the following actions (while the config is the active config):

•Cause the WORKABOUT PRO to go through a power cycle or suspend/resume.

•Disable and enable the radio, or tap the Reconnect button on the Diags windows.

•Modify the config, and tap on Commit.

Alternatively, you can choose another config as the active config and then switch back to the config for which EAP authentication was cancelled.

A.3.3 ThirdPartyConfig

If you choose to configure ThirdPartyConfig, the SCU will work with the operating system’s Windows Zero Config (WZC) to configure radio and security settings for the CF radio installed in the unit.

A-6WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual