Chapter 5: Settings

Decoded (HHP)

Check Digit

If you enable this parameter, a check digit is included with the decoded bar code data.

Transmit Number System

If this parameter is enabled, the number system digit is transmitted with the decoded bar code data.

Addendum Add-on 2 And Addendum Add-on 5

An addendum is a separate bar code, supplementary to the main bar code. Enabling these parameters defines the length of the addendum bar code to either 2 or 5 characters.

Addendum Required

When this parameter is set to on, the scanner does not accept the main bar code without an addendum.

Addendum Separator

“Addendum Separator” is a space that is added between the UPC E bar code and the Add-on code/Addenda. When this parameter is set to on, the scanner does not accept the main bar code without an addendum.

Prefix/Suffix

Refer to page 138 for details.

5.27.2.10 UPC/EAN Shared Settings

Extended Coupon Code

This parameter specifies whether or not the imager will read only UPC-A/EAN-13 bar codes that have addenda.

Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired behavior.

154WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual

Page 172
Image 172
Psion Teklogix ISO 9001 user manual 27.2.10 UPC/EAN Shared Settings, Extended Coupon Code