Psion Teklogix ISO 9001 user manual Vehicle Cradle Mounting Recommendations

Chapter 7: Peripheral Devices & Accessories

The Vehicle Cradle

7.11 The Vehicle Cradle

The vehicle cradle is a highly ruggedized, single station dock. Although it provides quick insertion and removal, the cradle holds the WORKABOUT PRO securely even when operated in high vibration environments.

Note: Shock and vibration specifications for the WORKABOUT PRO are veri- fied using Psion Teklogix-approved RAM mounts and mounting hardware. Use of non-certified Psion Teklogix mounting hardware is not recom- mended, and may void warranty coverage.

The model number for vehicle cradles varies depending on the type of hand-held:

•WORKABOUT PRO C – Model # WA1210-G2

•WORKABOUT PRO S – Model # WA1310-G2

A port replicator option is available for powered vehicle cradles. Refer to “The Port Replicator” on page 290 for details.

7.11.1 Vehicle Cradle Mounting Recommendations

Warning:	Before mounting a vehicle cradle in a vehicle, there are a number
	of operator safety issues that require careful attention. An improp-
	erly mounted cradle may result in one or more of the following:
	operator injury, operator visibility obstruction, operator distraction
	and/or poor ease of egress for the operator. Psion Teklogix strongly
	recommends that you seek professional mounting advice from the
	vehicle manufacturer.
	Cable routing within a vehicle cab also requires careful consider-
	ation, especially for separately tethered scanners and other devices
	with loose cables. If you are unable to obtain suitable advice,
	contact Psion Teklogix for assistance (see Appendix A: Summit
	Client Utility (SCU)). Note also that for better protection, the equip-
	ment should be mounted inside the vehicle roll cage.

Pedestal mounts are recommended for all fixed mount locations because they offer optimal operator access. In addition, for safety reasons, only pedestal mounts with fully locking joints should be used in vehicles. Always adjust the pedestal for the optimum viewing angle, and securely tighten the hex and wing screws.

The most effective way to mount the vehicle cradle is to use the four #8-32 threaded inserts on the rear of the unit. Bolts must not extend more than 10mm (3/8") into the cradle.

286WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual