Psion Teklogix ISO 9001 user manual Main Battery, Preparing The Workabout PRO For Operation

Chapter 2: Basic Checkout

Preparing The WORKABOUT PRO For Operation

2.1 Preparing The WORKABOUT PRO For Operation

2.1.1 The Main Battery

Warning:	Before charging the battery, it is critical that you review the battery
	safety guidelines in the “WORKABOUT PRO Hand-Held Com-
	puter Warranty & Regulatory Guide”, PN 8000126.

The WORKABOUT PRO C and WORKABOUT PRO S can be powered with one of the following lithium-ion battery packs:

•High-Capacity – Model No. WA3006, and

•Super High-Capacity – Model No. WA3010

2.1.1.1Charging The Main Battery

Important: Before opening the battery cover on your WORKABOUT PRO, press [FN/BLUE] [ENTER] to turn off the hand-held. When the battery cover is removed, a power-off switch is automatically acti- vated and the unit power is switched off; if the battery cover is opened while the hand-held is still powered on, the unit may reboot.

Important: Before replacing a battery, please read “Removing And Installing The Battery Pack” on page 34 and “Safely Swapping The Main Battery” on page 36 for details about safely swapping the battery.

Battery packs shipped from the factory are charged to approximately 40% and must be fully charged prior to use. Batteries can be charged using a variety of chargers and docking stations along with a WORKABOUT PRO internal charger. When using the internal charger, a suitable power source is required. All chargers and docking stations are described in Chapter 7: Peripheral Devices & Accessories beginning on page 265.

Note: If you are powering up a new unit, a warning message may appear on the screen indicating that the backup battery capacity is low. To recharge the internal battery, you must fully charge the WORKABOUT PRO with the main battery installed in the unit.

WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual 11