Connecting the Alarm INPUT/OUTPUT | Samsung SRD470D500 specs

connecting with other device

CONNECTING THE ALARM INPUT/OUTPUT

Connecting the alarm input signal

Connection port for the alarm input signal.

Connect one strand of the sensor signal line (two strands) to the alarm input port and connect the other to the [G] port.

Connecting the alarm output signal

Connection port for the alarm output signal.

Connect one strand of the sensor signal line

(two strands) to the alarm output port and connect the other to the [COM] port.

ALARM IN ALARM OUT

CONNECTING THE RS485 DEVICE

Connect the rear [RS485 +, –] ports to the external device.

M  You can connect and control the PTZ camera which supports the RS485 communication.

 Check if the RS485 device is compatible with the product first.

Pay attention not to change the polarity (+/-) of the RS485 device when connecting it.

 Depending on camera’s type, connection polarity can be different.

For further information, refer to the respective PTZ Camera’s documentation.

RS485

18_ connecting with other device

Image 18

Samsung SRD470D500 Connecting the Alarm INPUT/OUTPUT, Connecting the RS485 Device, Connecting the alarm input signal

Contents

Channel DVR Channel DVR Important Safety Instructions Before Start Normal capacity 170mAhContinuous standard load 0.2mA Contents Viewer Setup Using Live ViewerUsing Search Viewer SEC Backup Viewer Features Package Contents Standards Approvals Part Names and Functions Rear Part Names and Functions Front SRD-470SRD-470D Mode AudioREC Remote Control Using the Numeric buttonsChanging the Remote Control ID Checking the Installation Environment  InstallationManufacturer HDD Addition Please ensure that the HDD is free from such shock Cases might cause damage to HDD or recorded data Hard disk bracket Master hard disk SATA2 SATA1 Connecting POS Device Connecting the VIDEO, AUDIO, and MonitorConnecting the USB  Connecting with Other Device Connecting the alarm input signal Connecting the Alarm INPUT/OUTPUTConnecting the RS485 Device Connecting the alarm output signal Connecting the Network Connecting to Internet through Ethernet 10/100/1000BaseTConnecting to the Internet using the router Connecting to Internet through Adsl Shutting Down the System Getting StartedStarting the system  Live Login Locking All ButtonsYou will see the context sensitive menu as in the right Live Screen Configuration Icons on the Live Screen Split Mode Menu Error InformationSplit Mode Menu Live Screen Menu Single Mode Menu Zoom System Date/Time/Language Time. PTZ Alarm FreezeView the Launcher Menu PTZ Switching the screen automatically Live ModeSwitching the screen mode PIP Channel Setting Switching to Single Mode Zoom Selecting a Spot Out modeSpot OUT Multichannel Live Menu Freeze Audio ON/OFF in Single modeAudio ON/OFF Event Monitoring CH2 System Setup Setting the Date/Time/LanguageDate/Time/Language Setting Holiday Using the Calendar Permission Management Setting the AdministratorUsing Virtual Keyboard Permission Management Setting the Group  Using the DVRTo set the group authority To change the user password To restrict the user permissions When the user setup is done, press OK Setting the UserSetting Permissions Use direction buttons System Management Checking the System InformationSystem Management  Using Updating the SoftwareDVR Settings Log InformationSystem Log Use the up/down buttons Backup LogEvent Log Select Event Log Use direction buttons Camera Setting the DeviceSetting the Camera Press Enter button Setting the PTZ Usingthe DVR Storage Device Confirming Devices You can format a storage device HDD AlarmFormatting Select Format Item, and press Enter button Remote DevicesPOS Devices Remote Device  Using Setting the Monitor Setting Display positionMonitor Setting the Spot Out Setting the Screen Mode Record Setting the RecordingRecording Schedule Recording Schedule Event Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color Tags Record Option Setting Event Recording PropertiesWhen the Event recording setup is done, press OK Record Option Sensor Detection Setting the EventPreset Setting OFF Sensor does not operate Setting the Motion Detection Area Motion Detection Alarm Schedule Alarm ScheduleWindow of video loss detection area setup appears Video Loss Detection You can backup the desired data to a connected device BackupSetting the Backup Backup Setting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocol Setting the Protocol Move to Connection Mode, and press Enter  Refer to Ddns Setting. Connecting and Setting the NetworkWhen no router is used Dynamic IP Dhcp mode When a router is used Internal Port Range Set the same to the External Port Range Ddns Setting Live TransferLive Transfer Mailing Service Smtp SettingEvent Setting Group Setting Recipient SettingWhen the recipient setting is done, press OK PTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZ Preset Setting Camera Setting Search Time Search Backup Search Event SearchSearch & Play Select POS Search in the Search menu Use direction buttons POS SearchMotion Search POS Search Play Backup RangePlayback Play Using the Playback Button What is Web Viewer? Introducing WEB Viewer WEB Viewer Connecting WEB Viewer Click Install Using Live Viewer Quad Mode You can change the split mode by clicking each number iconSingle Mode Full Screen Mode Setting the display of the OSD time information Connected DVR Saving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg file Changing the Live Screen Channel Web viewer Using Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar System Viewer SetupYou can configure the various settings of the DVR system Date/Time/Language Holiday Permission Management System Management Device CameraStorage Device Remote Device POS DeviceMonitor For more information, refer to Setting the Recording. RecordRecording Schedule Event Record Duration REC Quality & ResolutionEvent Record Option Motion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss Detection Network For more information, refer to Network Configuration.You can check the Ddns settings Connection Mailing Service Smtp About What is Mobile Viewer?Key Features Mobile Viewer SEC Backup Viewer Recommended System Requirements  Backup Viewer Product Specification NtscPAL Hdmi YESRTSP/RTPUDP, CGI, Http YES  Appendix Adpcm GE/VCL TP/VICON Product Overview SRD-470/470D Default Setting Management Category Details Factory Default Duration Smtp Troubleshooting Quick start guide backup, search HDD installed. Try again with a different HDDBy the service personnel Playback Icon on the launcher to switch to Live mode 4CIF 2CIFCIF Version 2, June Open Source License Report on the ProductPreamble USAPage No Warranty How to Apply These Terms to Your New Programs Terms and Conditions Source Code Conveying Verbatim Copies Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream Recipients Patents Use with the GNU Affero General Public LicenseRevised Versions of this License Limitation of Liability Interpretation of Sections 15END of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Sales Network