Using Live Viewer | Samsung SRD470D500 specs

5.You may have “Windows Security Alert” that attempts to block this with the Windows Firewall. In that case, click <Unblock> to start Web Viewer.

6.Installation is complete.

Now you can see the main screen of Live Viewer.

USING LIVE VIEWER

The Live Viewer screen consists of following :

This displays the IP address and the model name of the connected DVR.

These menus consist of <LIVE>, <SEARCH>, <SETUP>, <ABOUT>.

These buttons are used for the screen split and full screen mode.

Shows the IP address and model name of the connected DVR.

Select the format of OSD information that will be displayed on Live Viewer.

These buttons are used for sequence and changing the screen channel.

These buttons are used for capture, print, and save the image.

Shows the channel of the connected DVR.

These buttons are used for PTZ related functions.

This displays the screen for connected camera with DVR.

M The resolution is set to 1024X768 pixels.

The initial split-screen mode is set according to the number of channels connected to DVR. You can change the split-screen mode by clicking buttons for split-screen modes.

 WEB VIEWER

English _73

Image 73

Samsung SRD470D500 user manual Using Live Viewer

Contents

Channel DVR Channel DVR Important Safety Instructions Normal capacity 170mAh Before StartContinuous standard load 0.2mA Contents Using Search Viewer Using Live ViewerViewer Setup SEC Backup Viewer Features Standards Approvals Package Contents Part Names and Functions Rear SRD-470 Part Names and Functions FrontSRD-470D Audio ModeREC Using the Numeric buttons Remote ControlChanging the Remote Control ID  Installation Checking the Installation EnvironmentManufacturer Please ensure that the HDD is free from such shock HDD Addition Cases might cause damage to HDD or recorded data Hard disk bracket Master hard disk SATA2 SATA1 Connecting the USB Connecting the VIDEO, AUDIO, and MonitorConnecting POS Device  Connecting with Other Device Connecting the RS485 Device Connecting the Alarm INPUT/OUTPUTConnecting the alarm input signal Connecting the alarm output signal Connecting to Internet through Ethernet 10/100/1000BaseT Connecting the NetworkConnecting to the Internet using the router Connecting to Internet through Adsl Starting the system Getting StartedShutting Down the System  Live Locking All Buttons LoginYou will see the context sensitive menu as in the right Icons on the Live Screen Live Screen Configuration Split Mode Menu Error InformationSplit Mode Menu Live Screen Menu Zoom Single Mode Menu View the Launcher Menu PTZ Alarm FreezeSystem Date/Time/Language Time. PTZ Switching the screen mode Live ModeSwitching the screen automatically PIP Switching to Single Mode Channel Setting Spot OUT Selecting a Spot Out modeZoom Multichannel Live Menu Audio ON/OFF Audio ON/OFF in Single modeFreeze Event Monitoring CH2 Setting the Date/Time/Language System SetupDate/Time/Language Using the Calendar Setting Holiday Using Virtual Keyboard Setting the AdministratorPermission Management Permission Management  Using the DVR Setting the GroupTo set the group authority To restrict the user permissions To change the user password Setting Permissions Setting the UserWhen the user setup is done, press OK Use direction buttons Checking the System Information System ManagementSystem Management Updating the Software  UsingDVR Log Information SettingsSystem Log Event Log Backup LogUse the up/down buttons Select Event Log Use direction buttons Setting the Camera Setting the DeviceCamera Press Enter button Usingthe DVR Setting the PTZ Confirming Devices Storage Device Formatting HDD AlarmYou can format a storage device Select Format POS Devices Remote DevicesItem, and press Enter button Remote Device  Using Setting Display position Setting the MonitorMonitor Setting the Screen Mode Setting the Spot Out Recording Schedule Setting the RecordingRecord Recording Schedule Setting Standard Recording Properties REC Quality / ResolutionEvent Record Duration Recording Color Tags When the Event recording setup is done, press OK Setting Event Recording PropertiesRecord Option Record Option Preset Setting Setting the EventSensor Detection OFF Sensor does not operate Motion Detection Setting the Motion Detection Area Window of video loss detection area setup appears Alarm ScheduleAlarm Schedule Video Loss Detection Setting the Backup BackupYou can backup the desired data to a connected device Backup Connection Mode Network ConfigurationSetting the Connection You can set the network connection route and protocol Move to Connection Mode, and press Enter Setting the Protocol When no router is used Connecting and Setting the Network Refer to Ddns Setting. Dynamic IP Dhcp mode Internal Port Range Set the same to the External Port Range When a router is used Live Transfer Ddns SettingLive Transfer Smtp Setting Mailing ServiceEvent Setting Recipient Setting Group SettingWhen the recipient setting is done, press OK Controlling a PTZ Device Using the PTZ cameraPTZ Device Getting started with PTZ Camera Setting Preset Setting Time Search Search Event Search Backup SearchSearch & Play Motion Search POS SearchSelect POS Search in the Search menu Use direction buttons POS Search Playback Backup RangePlay Play Using the Playback Button Introducing WEB Viewer What is Web Viewer? WEB Viewer Click Install Connecting WEB Viewer Using Live Viewer Single Mode You can change the split mode by clicking each number iconQuad Mode Full Screen Mode Connected DVR Setting the display of the OSD time information Capture Saves the current screen into a BMP or Jpeg file Saving the Live Screen on the PC Changing the Live Screen Channel Web viewer Using Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar You can configure the various settings of the DVR system Viewer SetupSystem Date/Time/Language Permission Management Holiday System Management Camera DeviceStorage Device POS Device Remote DeviceMonitor Record For more information, refer to Setting the Recording.Recording Schedule Event REC Quality & ResolutionEvent Record Duration Record Option You can set the alarm output time if a video loss occurs Alarm ScheduleMotion Detection Video Loss Detection You can check the Ddns settings For more information, refer to Network Configuration.Network Connection Smtp Mailing Service Key Features What is Mobile Viewer?About Mobile Viewer Recommended System Requirements SEC Backup Viewer  Backup Viewer Ntsc Product SpecificationPAL RTSP/RTPUDP, CGI, Http YESHdmi YES  Appendix GE/VCL TP/VICON Adpcm SRD-470/470D Product Overview Management Default Setting Duration Category Details Factory Default Smtp Troubleshooting By the service personnel HDD installed. Try again with a different HDDQuick start guide backup, search Playback Icon on the launcher to switch to Live mode 4CIF 2CIFCIF Preamble Open Source License Report on the ProductVersion 2, June USAPage No Warranty How to Apply These Terms to Your New Programs Source Code Terms and Conditions Conveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having Copies Use with the GNU Affero General Public License PatentsRevised Versions of this License Interpretation of Sections 15 Limitation of LiabilityEND of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Sales Network