
3 Select [On] to activate the alarm and enter the alarm settings.
• Select [Off] (default) to deactivate the alarm.
4 Press or
to adjust the setting, then press
to confirm the adjustment.
5 Press OK to confirm the alarm time settings.
6 Press or
, then
to select the repeat mode [Once] or [Daily].
»The display briefly shows [Alarm on] and the alarm icon remains visible while the alarm feature is activated.
Change language
You can change the language that you have set during the
1 Turn on the WAC7500.
2 Press MENU .
3 Select [Settings] > [Language].
4 Press or
, then
to select the language. 5 Press HOME to go to the Home menu.
Maintenance
This chapter tells you how to care for your WAC7500.
Cleaning
Note
•Avoid moisture and abrasion.
1Clean the WAC7500 only with a soft dry cloth.
Update
•When the WAC7500 is connected to a PC, you can download new firmware updates.
Update through PC connection
This chapter shows you how to install the WADM (Philips Wireless Audio Device Manager) software.The WADM is necessary to search and download software updates for the WAC7500.
1 On the PC, visit the www.philips.com/ welcome.
2 Download the latest software for the WAC7500 to the harddisk of the PC.
3 Turn on the WAC7500.
4 Ensure that the WAC7500 is connected to the network of the PC.
5 Insert the supplied software CD into the PC.
6 Follow the instructions on the PC to install WADM.
7 When the security alert message (Microsoft Windows Firewall) pops up, press ‘Unblock’ to allow the WADM application to run on the PC.
» The firewall is still effective and only allows the WADM to run.
8 On the WADM screen, select Device Configuration.
9 In the Device Configuration screen, select Firmware upgrade and click OK.
10 Click Browse to locate the software image file that you saved on the harddisk of the PC.
11 Click OK to start the update.
»The software update progress is shown.
»When the software installation is complete, the WAC7500 restarts.
28EN