• To delete the last character entry from the display, press CLEAR .
This chapter shows you how to create a wireless connection to a home network with static IP address.
1 Ensure that your encryption key (if required) is available.
2 Turn on your wireless access point or wireless router with broadband Internet.
3 Turn on the WAC7500.
4 On the WAC7500, press MENU .
5 Select [Settings] < [Network] >
[Wireless] and confirm.
6 Select the network from the list in the display.
• Enter encryption key (if required) with the remote control, then press OK to continue.
7 Select [Static] and confirm.
8 Enter the static IP address with the remote control and confirm with OK .
9 Select (Apply settings?) [Yes] and confirm.
»The WAC7500 displays a confirmation screen that the settings are saved.
Create wired connection with automatic IP address
This is how to navigate and select with the remote control:
•Press 
or 
to select a menu option.
•Press 
to confirm a selection.
•Press 
to go back to the previous screen.
•Press HOME to go to the Home menu. The alphanumeric buttons of the remote control are
•To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the WAC7500.
• | To cycle through the alphanumeric |
| |
| |||
| characters that are available, press a button | lish | |
| repeatedly. | ||
• | To delete the last character entry from the | Eng | |
| display, press CLEAR . |
| |
| This chapter shows you how to create a |
| |
|
| ||
1 | wired connection to a home network with | network | |
Use an Ethernet cable (sold separately) to | |||
| automatic IP address. |
| |
| connect the WAC7500 to the access point | home | |
| or router that connects to your home | ||
| network with broadband Internet access. | a | |
2 | Turn on your wireless access point or | to | |
Connect | |||
3 | wireless router with broadband Internet. | ||
| |||
Turn on the WAC7500. |
| ||
4 | On the WAC7500, press MENU . |
| |
5 | Select [Settings] > [Network] > [Wired] |
|
> [Automatic] > (Apply settings?) [Yes] and confirm.
» The WAC7500 displays a confirmation screen that the settings are saved.
Create wired connection with static IP address
This is how to navigate and select with the remote control:
• Press 
or 
to select a menu option.
•Press 
to confirm a selection.
• Press 
to go back to the previous screen.
•Press HOME to go to the Home menu. The alphanumeric buttons of the remote control are
•To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the WAC7500.
•To cycle through the alphanumeric characters that are available, press a button repeatedly.
•To delete the last character entry from the display, press CLEAR .
EN 11
