Philips X600 manual Answer a second call Network dependent, Contact Picture

1.Make a second call. The first call will be put on hold automatically.

2.Select Conference Call from the call menu. The

two calls will be combined and a conference call is established.

During the multi-party call, you can answer a new incoming call or add a new member to the call by dialing the new member (the ongoing multi-party call will be put on hold automatically). Once the call is established, select Establish conference call from the call menu to add the new member to the multi- party call (you can add up to five members).

If you wish to separate one member from the call, you can select Split conference call during the multi- party call. To disconnect a member from the call, select End call in conference.

Answer a second call (Network dependent)

If you have activated Call waiting (enabled by default on your phone), you will be alerted when there is a second incoming call. You can:

1.Press ( to answer the second call. The current call will be put on hold automatically.

2.Press ) to reject the second call and continue with your current call.

3.When there is one active call and one call on hold, you can press , Swap or L Options to carry out the following operations:

•	Conference call	•	Call transfer	•	Handsfree
•	Mute	•	Record	• End all calls
• End calls		• View contacts		•	Menu

If you press the numeric keys, the notepad editor will be opened under call waiting mode.

Contact Picture

This feature allows you to link a contact in your phonebook to a photo you have taken using the camera function, or a picture you have downloaded via WAP or data cable. During a call, if the other party's name card is linked to a picture, the incoming call background will display the corresponding picture. This feature is referred to as Contact picture.

Contact picture shall be a photo or picture on the phone memory. The photo size should not be larger than 176 x 220 pixels.

14 Calling