SPECIFICATIONS
Continuous Output Power at 1% THD (Wrms):
ZX475Ti
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) | 18 x 4 |
Into 4 ohms Stereo @ 14.4 Vdc | 75 x 4 |
Into 2 ohms Stereo @ 14.4 Vdc | 150 x 4 |
Into 4 ohms Bridged @ 14.4 Vdc | 250 x 2 |
Minimum Speaker Load, Bridged | 2 ohms |
Minimum Speaker Load, Stereo | 1 ohm |
Recommended Fuse Size, Stereo 4 ohms / Stereo 2 ohms / Bridged | 60 / 80 / 80 amp |
Continuous Current Draw @ Full Power * | 60 amps |
Peak Current Draw @ Full Power ** | 85 amps |
Dimensions, Chassis (inches) | 15.00 L x 9.00 W x 2.25 H |
Dimensions, Overall (inches) | 16.00 L x 10.00 W x 2.25 H |
Total Harmonic Distortion | < 0.02 % |
Signal to Noise Ratio | > 100 dB |
Frequency Response | +/- 1 dB, 20 Hz to 20 kHz |
Bass Boost | 0 to +18 dB @ 45 Hz |
Crossover Frequency Range | 40 Hz to 8 kHz |
Crossover Slope | 24 dB per octave |
Input Sensitivity | 200 millivolts to 6 volts |
Input Impedance | > 30 kohms |
Input Voltage Range | 0.2 volts to 6 volts |
Power Supply Operating Range | 10.5 Vdc to 15.5 Vdc |
Typical current draw at idle | < 3 amps |
*Average continuous current draw when playing typical music material.
**Average peak current needed for musical peaks (<20ms) when playing typical music material.
Due to ongoing research and development, features, specifications and availability are subject to change without notice.
ZXTi amp manualpg.03