Enterasys Networks 8000/8600 manual Installing a DC Power Supply, DC Power Supply Specifications

Installing the Hardware

4.Use the #2 Phillips screwdriver to tighten the captive screws on each side of the power supply to secure it to the chassis.

5.Attach the power cable to the AC power supply.

Installing a DC Power Supply

The X-Pedition DC power supply delivers 3.3, 5, and 12 volts DC to the X-Pedition’s control module(s), fan modules, and other components. A single DC power supply provides enough current to operate a fully-configured chassis.

DC Power Supply Specifications

The following table lists the physical specifications for the X-Pedition’s DC power supplies.

	X-Pedition 8000	X-Pedition 8600
Input Voltage	48 to 60 Volts	48 to 60 Volts
	(14 Amperes Max.)	(27 Amperes Max.)
Output Wattage	390 Watts	780 Watts
At 3.4 V	70 Amps	140 Amps
At 5.1 V	25 Amps	50 Amps
At 12 Volts	2 Amps	4 Amps
Dimensions	2.5 in. H x 7.70 W x 11 D	5.05 in. H x 7.70 W x 12.28 D
	6.35 cm H x 19.56 W x 27.94 D	12.83 cm H x 19.56 W x 31.19 D
Weight	6 lbs	11 lbs
	2.73 Kg	4.99 Kg

Caution: To reduce the risk of electric shock or energy hazards:

1. Connect to a reliably grounded SELV source.

2.The branch circuit over current protection must be rated at a maximum of 20A for the X-Pedition 8000 and 40A for the X-Pedition 8600.

3.Use 14 AWG solid copper wires on the X-Pedition 8000 and 8 AWG solid copper wires on the X-Pedition 8600 only.

4.A readily accessible disconnect device that is suitably approved and rated shall incorporated in the field wiring.

5.To be installed in a restricted access area in accordance with the NEC or authority having jurisdiction.

60 Enterasys X-Pedition 8000/8600 Getting Started Guide