Enterasys Networks 8000/8600 manual AC Power Supply Specifications, Pedition Dimensions

Hardware Overview

AC Power Supply Specifications

The following table lists the specifications for the X-Pedition’s AC power supplies.

	X-Pedition 8000	X-Pedition 8600
Dimensions	8.27 in. H x 17.25 W x 12.25 D	8.27 in. H x 17.23 W x 19.25 D
	22.23 cm H x 43.82 W x 31.12 D	22.23 cm H x 43.82 W x 48.9 D
Weight	Pounds: 24Lbs	Pounds: 47 Lbs
	Kilograms: 10.8 Kg	Kilograms: 21.2 Kg
AC Power	100-125 VAC, 5A maximum	100-125 VAC, 10A maximum
	200-240 VAC, 3A maximum	200-240 VAC, 6A maximum
	50/60 Hz	50/60 Hz
Output Wattage	390 Watts	780 Watts
At 3.4 V	70 Amps	140 Amps
At 5.1 V	25 Amps	50 Amps
At 12 Volts	2 Amps	4 Amps
Operating	Fahrenheit: 41oF to 104oF	Fahrenheit: 41oF to 104oF
Temperature	Centigrade: 5oC to 40oC	Centigrade: 5oC to 40oC

To ensure against equipment failure, you can install a redundant power supply. When two power supplies are active in the X-Pedition, they load share, each supply delivering approximately 50 percent of the current needed. Moreover, if one of the power supplies fails, the other power supply immediately assumes the entire load, thus preventing any system outage.

The AC power supply has a green status LED. When the LED is lit, the power supply is connected to an appropriate power source and is active. The status LED is lit when you switch the power supply on, not when you plug the power supply into a power source.

Enterasys X-Pedition 8000/8600 Getting Started Guide 17