SSR-GSX21-02-AA and SSR-GLX29-02-AA | Enterasys Networks 8000/8600

Hardware Overview

SSR-GSX21-02-AA and SSR-GLX29-02-AA

The SSR-GSX21-02-AA and SSR-GLX29-02-AA line cards contain two independent Gigabit (1000 Mbps) Ethernet ports. The ports connect to multimode fiber (MMF) cables. Figure 10 shows the front panel of the SSR-GSX21-02-AA line card.

SSR-GSX21-02-AA

1000BASE-LX

12

Offline	Tx	Link
Offline
	Rx	AN

Online

Tx Link

Hot

Rx AN

Swap

Gigabit PortGigabit Port

Figure 13. Front panel of SSR-GSX21-02-AA line card

LEDs

Table 8. SSR-GSX21-02-AA and SSR-GLX29-02-AA line card LEDs

LED	Condition	Description

Offline	Amber	The line card is offline (powered off) but is ready for hot swap.
		The Offline LED also lights briefly during a reboot or reset of
		the X-Pedition but goes out as soon as the control module
		discovers the line card.

Online	Green	The line card is online and is ready to receive, process, and send
		packets if configured to do so.

Per-port Link	Green	The port hardware detects a cable plugged into the port and a
		good link is established.

	Red	The port received an error during operation.
	(intermittent)

	Red (solid)	The port hardware detects a cable plugged into the port,
		however, a bad link is established.

	Off	Indicates that no link from the port exists.

Per-port Rx	Green	The port’s transceiver received a packet.

	Amber	The port’s transceiver received a flow control packet.

Per-port Tx	Green	The port’s transceiver transmitted a packet.

	Amber	The port’s transceiver transmitted a flow-control packet.

Enterasys X-Pedition 8000/8600 Getting Started Guide

35

Image 47

Enterasys Networks 8000/8600 manual SSR-GSX21-02-AA and SSR-GLX29-02-AA

Contents

8000/8600 Page Class a ITE Notice Enterasys X-Pedition 8000/8600 Getting Started Guide Enterasys NETWORKS, INC Program License Agreement Enterasys X-Pedition 8000/8600 Getting Started Guide Declaration of Conformity Enterasys X-Pedition 8000/8600 Getting Started Guide Contents SSR-HSSI-02-CK SSR-FDDI-02 Who should Read this Guide? What’s New For Information About See How to Use this GuideRelated Documentation If you want to See Specifications Chapter Features Overview IPX RIP, SAP Feature Specification LLC Snmp TCP/UDP ServicesTCP Port UDP Port Description Bridging Features Routing Port and Protocol VLANs Igmp Dvmrp PIM-SM Layer-4 SwitchingIP Routing IP Multicast Routing Security Quality of Service Vlan StatisticsManagement Platforms Chassis Hardware Overview Front view of a fully loaded X-Pedition 8600 chassis Hot Swapping a Fan Tray Loosen the captive screws BackplaneFan Module Tighten the captive screws Memory Module Control Modules External Controls LEDs Control Module LED Indicators Front view of an X-Pedition 8000 AC power supply AC Power Supply Pedition Dimensions AC Power Supply Specifications Front view of an X-Pedition 8000 DC power supply DC Power Supply Pedition Switching Fabric Module X-Pedition 8600 onlyDC Power Supply Specifications Line Cards LEDs Pedition 8600 Switching Fabric module LEDs Front panel of SSR-ATM29-02 line card SSR-ATM29-02 APHY-82V Port type SpecificationOptions Available Ports Interface Physical DimensionsTemperature LEDs SSR-ATM29-02 LED Indicators MAC Addresses SSR-CM2B-64, SSR-CM3-128, and SSR-CM4-256Port Number of Flows/Routes Asic TypeNetwork Interfaces FPHY-01 MMF DAS FPHY-02 UTP SAS FPHY-09 SMF DAS LEDs SSR-FDDI-02 LED Indicators SSR-GLX39-02 LED SSR-GLX39-04 and SSR-GSX31-04 Offline L Online a Switch Method LEDs SSR-GLX39-04 and SSR-GSX31-04 LED Indicators Condition Description SSR-GLX70-01-AA and SSR-GLH39-02 LED SSR-GSX21-02-AA and SSR-GLX29-02-AA LED SSR-GSX31-02 Link is down Network Interface SSR-GTX32-04 and SSR-GTX32-02 LEDs SSR-GTX32-04 and SSR-GTX32-02 LED Indicators SSR-HFX21-08-AA and SSR-HFX29-08-AA SSR-HSSI-02-CK LEDs SSR-HSSI-02-CK LED Indicators LEDs SSR-HTX22-08-AA line card LEDs SSR-HTX22-08-AA and SSR-HTX12-08-AA SSR-HTX32-16 SSR-POS29-04 line card Ports SSR-POS29-04 and SSR-POS21-04 LEDs SSR-POS29-04 and SSR-POS21-04 LED Indicators SSR-POS39-02 line card Ports SSR-POS39-02 and SSR-POS31-02 LEDs SSR-POS39-02 and SSR-POS31-02 LED Indicators SSR-SERCE-04-AA and SSR-SERC-04-AA Preventing Injury Safety Considerations Before Removing Fiber Optic Protective Caps Preventing Equipment Damage Power Consumption Hardware Specifications SSR-HFX21-08-AA Verifying Your Shipment Installing the Hardware Tabletop Installation Installing the Chassis Installing the X-Pedition 8600 chassis in an equipment rack Rack Mount Installation Pedition Dimensions Installing an AC Power Supply SSR-8 Installing a DC Power Supply DC Power Supply Installation Procedure Pedition 8600 DC Power Supply Pedition 8000 DC Power Supply XP-8600 DC Power Supply Internal Power Supply One Splitting each source wire to two 12-gauge wires Installing a Control Module Installing the Control Module Firmware Image Requirements Installing a Memory UpgradeDefault Module Settings Power down the chassis Slot P7 Slot P8 Memory slots Card Guides Circuit Card Metal Plate Installing the Switching Fabric Module X-Pedition 8600 only Installing the Hardware Line card installation notes Installing Line Cards Default Module Settings CLI Setup CLI Setup SSR-POS29-04 0.2 SSR-POS21-04 Port show port status se.x.y where x is the chassis Remove the module Handling the ModuleTools Hot Swap Instructions Installing a line card Installing the Fddi PHY Cards Installing FPHYs Installing an ATM PHY card Installing the ATM PHY Cards APHY-21 and APHY-29IR Connecting ATM PHY CardsAPHY-67 and APHY-77 APHY-22 Chapter Software Installation and Setup Install a Pcmcia flash card in a Control Module Installing a Pcmcia Flash Card Installing a Pcmcia Flash Card Powering On and Booting the Software Access Modes Starting the Command Line Interface Some commonly used CLI commands Key sequence Command Basic Line Editing Commands Setting Basic System Information Setting Basic System Information Setting Up Snmp Community Strings Setting Up Passwords System set password loginenable none Setting the DNS Domain Name and Address Setting Syslog Parameters Loading System Image Software Loading Boot Firmware Activating the Configuration Commands in the Scratchpad Viewing the Current Configuration Page Problem Solution Appendix a Troubleshooting Configuration Commands in the Scratchpad on Use the procedure in Setting the DNS Domain 104 Enterasys X-Pedition 8000/8600 Getting Started Guide Appendix B Hardware Components BNC SSR-ATM29-02 Pin Connection Connector Pin AssignmentsSSR-CM2B-64, SSR-CM3-128, and SSR-CM4-256 DB9-RS232 Console Port Pin Assignments 100 Ethernet Management Port Pin Assignments Pin Connection RJ-45 Console Port Pin Assignments Pin Connection SSR-FDDI-02 Links Link Power BudgetMMF SMF MMF SSR-GLX39-02 Cabling and Connector Specifications SSR-GLX39-04 and SSR-GSX31-04 Minimum 24 dBm Maximum DBm SSR-GLX70-01-AA and SSR-GLH39-02 SSR-GSX21-02-AA and SSR-GLX29-02-AA Rx/Tx Pin Assignments SSR-GLX39-02 Media Specifications Port Type 1000BASE-LXSSR-GSX21-02-AA and SSR-GLX29-02-AA SSR-GSX31-02 SSR-GSX31-02 Media Specifications Port Type SSR-GTX32-04 and SSR-GTX32-02 RJ-45 Connector Pin Assignments Pin Connection 100BASE-FX SSR-HFX21-08-AA and SSR-HFX29-08-AA Connectivity Guidelines Map for the 50-pin Hssi connector Pin Signal Pin Hssi connector SSR-HTX22-08-AA and SSR-HTX12-08-AA SSR-HTX22-08-AA Media Specifications Port TypeRJ-45 Connector Pin Assignments SSR-HTX22-08-AA and SSR-HTX12-08-AA RJ-45 connectors SSR-HTX32-16 SSR-HTX32-16 Media Specifications Port Type MT-RJ SSR-POS29-04 and SSR-POS21-04SSR-POS39-02 and SSR-POS31-02 SSR-SERCE-04-AA and SSR-SERC-04-AA SSR-SERCE-04-AA and SSR-SERC-04-AA Media Specifications LFH-60 high density connector Getting Help Appendix C Technical Support Getting Help CLI Numerics Nvram IgmpIPX SAP UDP Spectrum