Enterasys Networks 8000/8600 manual SSR-SERCE-04-AA and SSR-SERC-04-AA, Condition Description

Hardware Overview

SSR-SERCE-04-AA and SSR-SERC-04-AA

The SSR-SERCE-04-AA and SSR-SERC-04-AA line cards each contain two dual-serial WAN ports (two serial ports located on one high density connector). In addition, the Quad Serial – C line card includes compression, and the Quad Serial – CE line card includes compression and encryption, for each WAN port. Figure 22 shows the front panel of the Quad Serial – CE WAN line card.

SSR-SERCE-04-AA				Quad Serial - C
	1	2	3	4
	Link	1,2	Link	3,4
Offline				Hot
	Rx		Rx
	Tx		Tx	Swap
Online

Figure 22. Front panel of the SSR-SERCE-04-AA line card

LEDs

Table 17. SSR-SERCE-04-AA and SSR-SERC-04-AA line card LEDs

LED	Condition	Description
Offline	Amber	The line card is offline (powered off) but is ready for hot swap.
		The Offline LED also is lit briefly during a reboot or reset of the
		X-Pedition but goes out as soon as the control module discovers
		the line card.
Online	Green	The line card is online and is ready to receive, process, and send
		packets if configured to do so.
Per-port Link	On	The line card detected a cable plugged into the port and a good
		link is established.
Per-port Rx	On	The port’s transceiver received data.
Per-port Tx	On	The port’s transceiver transmitted data.

50 Enterasys X-Pedition 8000/8600 Getting Started Guide