Enterasys Networks 8000/8600 manual Led

Hardware Overview

Table 7. SSR-GLX70-01-AA and SSR-GLH39-02 line card LEDs (Continued)

LED	Condition	Description
Per-port Link	Green	The port hardware detects a cable plugged into the port and a
		good link is established.
	Red	Indicates that the port received an error during operation.
	(intermittent)
	Red (solid)	The port hardware detected a cable plugged into the port,
		however, a bad link is established.
	Off	Indicates that no link from the port exists.
Per-port Rx	Green	The port’s transceiver received a packet.
	Amber	The port’s transceiver received a flow-control packet.
Per-port Tx	Green	The port’s transceiver transmitted a packet.
	Amber	The port’s transceiver transmitted a flow-control packet.
Per-port AN	Green	Green – indicates that the line card has auto negotiated the
		operating mode of the link between full-duplex and half-
		duplex.
	Amber	Amber (intermittent) – indicates that Auto-Negotiation is in
	(intermittent)	process.
	Amber (solid)	Indicates a problem with Auto-Negotiation configuration.
	Red	Indicates an Auto-Negotiation failure. This fault may occur if
		the link partner does not support full duplex.
	Off	Auto-Negotiation was been disabled or the link is down.

34 Enterasys X-Pedition 8000/8600 Getting Started Guide