Enterasys Networks 8000/8600 manual SSR-HTX32-16

Hardware Overview

SSR-HTX32-16

The SSR-HTX32-16 16-port line card contains 16 independent Ethernet ports. Each port senses whether it is connected to a 10-Mbps segment or a 100-Mbps segment and automatically configures itself as a 10BASE-T or 100BASE-TX port. Figure 19 shows the front panel of the SSR-HTX32-16 line card.

SSR-HTX32-16								10/100BASE-TX
Offline
									Hot
Online	2	4	6	8	10	12	14	16	Swap
	1	3	5	7	9	11	13	15

Figure 19. Front panel of SSR-HTX32-16 (T-Series) line card

LEDs

Table 14. SSR-HTX32-16 line card LEDs

LED	Condition	Description
Offline	Amber	The line card is offline (powered off) and is ready for hot swap.
		The Offline LED also lights briefly during a reboot or reset of the
		X-Pedition and goes out as soon as the control module discovers and
		properly initializes the line card.
Online	Green	The line card is online and is ready to receive, process, and send
		packets if configured to do so.
Link	Green	Each port has two LEDs on its connector. The green LED on the left
		side of the connector indicates the link status. When this LED is lit,
		the port hardware is detecting that a cable is plugged into the port
		and the port has established communication with the device at the
		other end.
Activity	Amber	The amber LED on the right side of each port connector flashes each
		time the port’s transceiver sends or receives packets.

Enterasys X-Pedition 8000/8600 Getting Started Guide 45