Hardware Overview

SSR-POS29-04 and SSR-POS21-04

The SSR-POS29-04 and SSR-POS21-04 modules provide high-speed connectivity to SONET networks. These modules support ACL-based filtering, Layer-4 application-aware switching, QOS features, and Server Load Balancing. The SSR-POS29-04 and SSR-POS21-04 are available as

4-port OC-3 SMF or MMF models and are compatible with the X-Pedition 8000/8600 hardware platforms. The POS OC-3c line cards use MT-RJ connectors to attach to multimode fiber (MMF) and single mode MT-RJ cables. To attach the segment cables to a POS OC-3c line card, obtain an MT-RJ cable and plug one end into the port connector. Plug the other end into the port of the other device. Since MT-RJ cables consist of only one line, there are no concerns about matching the receive port with the transmit port. Figure 20 shows an SSR-POS29-04 line card.

-04 -POS29 SSR

Offline

1

Link

Tx

Rx

1

Link

Tx

Rx

2

Link

Tx

 

C3

SMF

 

-O

 

 

POS

 

 

2

 

k

Hot

 

 

Lin

 

ap

Tx

 

 

Figure 20. SSR-POS29-04 line card

Note: If your system uses a redundant power configuration or only one power supply, you will not be able to support more than 5 SSR-POS29-04 and SSR-POS21-04 cards in the X-Pedition 8000 and 10 in the X-Pedition 8600.

Ports

4OC-3 MT-RJ MMF Ports

4OC-3 MT-RJ SMF Ports

Physical Dimensions

Size: 27.94 cm H x 3.94 W x 19.68 D (11.00 in. H x 1.55 W x 7.75 D)

Weight: 1.4 kg (3.0 lbs)

46

Enterasys X-Pedition 8000/8600 Getting Started Guide

Page 58
Image 58
Enterasys Networks 8000/8600 manual SSR-POS29-04 and SSR-POS21-04, SSR-POS29-04 line card Ports