Enterasys Networks 8000/8600 manual SSR-GSX21-02-AA and SSR-GLX29-02-AA

SSR-GSX21-02-AA and SSR-GLX29-02-AA

SSR-GSX21-02-AA and SSR-GLX29-02-AA

Connector Pin Assignments

The connector pins are assigned as follows:

	Table 37. SSR-GSX21-02-AA and SSR-GLX29-02-AA Rx/Tx Pin Assignments
Pin	Connection
Rx	When connecting ports with a Fiber Optic cable, ensure that you mate the connections
	properly (i.e., connect Tx ports to Rx ports). This may require the use of a fiber
Tx
	crossover cable.

Cabling and Connector Specifications

The following table lists the media specifications for the SSR-GLX39-02 (T-Series) line card.

Table 38. SSR-GLX39-02 Media Specifications

Port Type	Specification
1000BASE-LX	• 802.3z standard (also uses 802.3x for flow control)

•SC-style Media Interface Connector (MIC); either connection pin in the MIC can be used for transmit or receive; see SSR-GSX21-02-AA and SSR-GLX29-02-AAon page 113 for attaching cables

•62.5 micron or 50 micron multimode fiber-optic cable

•9.5 micron single mode fiber-optic cable

•Maximum 550 meters (1804 feet)1 segment length for 62.5 micron multimode fiber-optic cable

•Maximum 550 meters (1804 feet)1 segment length for 50 micron multimode fiber- optic cable

•Maximum 5 kilometers (16404 feet) segment length for 10 micron single mode fiber-optic cable

1.Mode Conditioning Patch cord required.

Enterasys X-Pedition 8000/8600 Getting Started Guide 113