Enterasys Networks 8000/8600 manual SSR-GLX39-02

Hardware Overview

SSR-GLX39-02

The SSR-GLX39-02 (T-Series) line card provides the same features as the SSR-GSX31-02 line card, but supports single mode fiber (SMF) as well as multimode fiber (MMF). Figure 10 shows the front panel of the SSR-GLX39-02 (T-Series) line card.

SSR-GLX39-02 1000BASE-LX

12

Offline	Tx	Link
	Rx	AN

Online

Tx Link

Hot

Rx AN Swap

Gigabit PortGigabit Port

Figure 10. Front panel of SSR-GLX39-02 (T-Series) line card

LEDs

Table 5. SSR-GLX39-02 line card LED Indicators

LED	Condition	Status
Offline	Amber	The line card is offline (powered off) but is ready for hot
		swap.
		The Offline LED also lights briefly during a reboot or
		reset of the X-Pedition but goes out as soon as the control
		module discovers the line card.
Online	Green	The line card is online and is ready to receive, process,
		and send packets if configured to do so.
Per-port Link	Green	The port hardware detects a cable plugged into the port
		and a good link is established.
	Red (intermittent)	The port received an error during operation.
	Red (solid)	The port hardware detects a cable plugged into the port,
		however, a bad link is established.
	Off	Indicates that no link from the port exists.
Per-port Rx	Green	The port’s transceiver received a packet.
	Amber	The port’s transceiver received a flow control packet.
Per-port Tx	Green	The port’s transceiver transmitted a packet.
	Amber	The port’s transceiver transmitted a flow-control packet.

28 Enterasys X-Pedition 8000/8600 Getting Started Guide